Allied Telesis AT-WA7500, AT-WA7501 manual SubType Value

Chapter 3: Configuring the Ethernet Network

To customize subtype filters

1.From the main menu, click Ethernet > Customizable Subtype Filters. The Customizable Subtype Filters screen appears.

2.For each subtype field, check or clear the Allow/Pass check box to configure if the subtypes are allowed to pass or are dropped. If you check the check box, the subtype is allowed to pass.

3.In the SubType field, choose the customizable frame subtype. For help, see the next table.

4.In the Value field, enter the two hex pairs. For help, see the next table.

5.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

Table 19. Subtype Filter Descriptions
SubType	Value
DIX-IP-TCP-Port	Port value in hexadecimal.
DIX-IP-UDP-Port	Port value in hexadecimal.
DIX-IP-Protocol	Protocol number in hexadecimal.
DIX-IPX-Socket	Socket value in hexadecimal.
DIX-EtherType	Specify the registered DIX type in hexadecimal.
SNAP-IP-TCP-Port	Port value in hexadecimal.

84