Allied Telesis AT-WA7500, AT-WA7501 manual Frame Type Explanation

Chapter 3: Configuring the Ethernet Network

5.If you set the Scope field to Unlisted for any of the frame types, you must also configure predefined subtype filters or customizable subtype filters. For help, see the next section, “Using Predefined Subtype Filters” on page 83 or “Customizing Subtype Filters” on page 83.

Table 18. Frame Type Filter Descriptions

Frame Type	Explanation
DIX IP TCP Ports	Primary Internet Protocol Suite (IP)
DIX IP UDP Ports	transport protocols.
SNAP IP TCP Ports
SNAP IP UDP Ports
DIX IP Other Protocols	IP protocols other than TCP or User
SNAP IP Other Protocols	Datagram Protocol (UDP).
DIX IPX Sockets	Novell NetWare protocol over Ethernet II
	frames.
SNAP IPX Sockets	Novell NetWare protocol over 802.2
	SNAP frames.
802.3 IPX Sockets	Novell NetWare protocol over 802.3 RAW
	frames.
DIX Other Ethernet Types	DIX or SNAP registered protocols other
SNAP Other Ethernet	than IP or IPX.
Types
802.2 IPX Sockets	Novell running over 802.2 Logical Link
	Control (LLC).
802.2 Other SAPs	802.2 SAPs other than IPX or SNAP.

Note

You should not filter HTTP, Telnet, SNMP, and ICMP frames if you are using WAPs because these frame types are used for configuring, troubleshooting, and upgrading WAPs.

82