Allied Telesis AT-WA7500 Configuring 802.11a Radio Advanced Parameters, Parameter Description

Chapter 4: Configuring the Radios

Configuring

802.11a Radio

Advanced

Parameters

1.From the main menu, click 802.11a Radio > Advanced Configuration. The Advanced Configuration screen appears.

2.Configure the advanced parameters. For help, see the next table.

3.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

Table 39. 802.11a Radio Advanced Parameter Descriptions

Parameter	Description
Power Output Level	Set the transmitted power level:
	Maximum: Sets the output power to the highest
	level supported by the radio.
	Medium: Sets the output power to a lower level
	than the highest level supported by the radio.
	Low: Sets the output power to a level higher than
	the lowest level supported by the radio.
	Minimum: Sets the output power to the lowest
	level supported by the radio.
	Lowering the power output level reduces the
	radio coverage for this area and reduces the
	range for this radio.

124