Chapter 8: Managing, Troubleshooting, and Upgrading Access Points
238
4. Click the button under the Configuration Summary title to switch
between displaying all configuration settings and displaying the
configuration settings that are different from the factory default
settings.
To view a processor utilization graph
1. From the main menu, click Maintenance > About This Access Point.
The About This Access Point screen appears. This screen is read-
only.
2. Click the Processor and Revision link. The Processor Utilization graph
appears.
Using the LEDs
to Locate Access
Points
You can use the LEDs to help you locate a specific access point in your
building.
To locate an access point
1. From the menu, click Maintenance > About this Access Point. The
About this Access Point screen appears.
2. Click the Find This Access Point button. The access point LEDs start
blinking, as shown in the next table.
3. The LEDs continue to blink until you click the Finished Finding Access
Point button.
Table 67. Find This Access Point
Power Wireless #1 Wireless #2 Wired LAN Root/Error
LED On LED Off
LED Flashing