Allied Telesis AT-WA7500, AT-WA7501 manual Example Configuring an 802.11g Access Point, Screen

Chapter 1: Getting Started

In a simple wireless network, the access point that is connected to the wired network serves as a transparent bridge between the wired network and wireless end devices.

To install a simple wireless network

1.Configure the initial IP address. For help, see “Configuring the Access Point (Setting the IP Address)” on page 38.

2.Install the access point. For help, see Chapter 2, “Getting Started” on page 11.

3.Configure the Ethernet network. For help, see Chapter 3, “Configuring the Ethernet Network” on page 64.

4.Configure the radios. For help, see Chapter 4, “Configuring the Radios” on page 96.

5.Decide what level of security you want to implement in your network. For help, see Chapter 6, “Configuring Security” on page 169.

Example - Configuring an 802.11g Access Point

Host

			Access
			point
		Ethernet
	Figure 7. 802.11g Access Point
Table 5. 802.11g Access Point Parameter Settings
Screen		Parameter				Access Point
802.11g Radio		Node Type			Master
		SSID (Network			Manufacturing
		Name)
Spanning Tree		Root Priority		5
Settings
		Ethernet Bridging			Checked
		Enabled

22