Allied Telesis AT-WA7500, AT-WA7501 Using Command Console Mode, Entering Command Console Mode

Chapter 9: Additional Access Point Features

Using Command Console Mode

Entering

Command

Console Mode

You can use the Command Console mode to manipulate some access point files and file segments. You can also use Command Console mode to upgrade access points using TFTP and script files.

You access the Command Console mode through the serial port using a communications program or over the network using a telnet session. You cannot access Command Console mode using a web browser interface.

1.Use a communications program or telnet to start a session with the access point. For help, see “Using a Communications Program” on page 40.

2.From the Access Point Configuration menu, choose Maintenance.

3.From the Maintenance menu, choose Command Console. The list of commands appears.

To exit Command Console mode

ˆAt the prompt, type exit.

You return to the Maintenance menu.

276