Allied Telesis AT-WA7500, AT-WA7501 manual 188

Chapter 6: Configuring Security

To configure a VLAN

1.From the main menu, click Spanning Tree Settings. The Spanning Tree Settings screen appears.

2.Check or clear the Enable GVRP for VLAN check box:.

ˆCheck the check box if the VLAN switch is configured to dynamically configure its ports based on the end devices’ needs.

ˆClear the check box if the VLAN switch is statically configured to always forward specific VLANs to specific ports.

3.Click Submit Changes to save your changes.

4.From the main menu, click Security. If you have enabled more than the primary service set, you can configure each secondary service set for a different VLAN.

188