Allied Telesis AT-WA7501, AT-WA7500 manual Parameter Explanation

AT-WA7500 and AT-WA7501 Installation and User’s Guide

5.From the menu, click DHCP Server Setup. The DHCP Server Setup screen appears.

6.Configure the DHCP server. For help, see the next table.

7.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

Table 16. DHCP Server Setup Parameter Descriptions

Parameter	Explanation
Low Address	Enter the low IP address in the range of IP
	addresses available to the DHCP server for
	distribution to DHCP clients.
	If these addresses are not on the same subnet as
	the access point, the access point will perform
	Network Address Translation (NAT) for the clients
	to which it grants IP addresses.
High Address	Enter the high IP address in the range of IP
	addresses available to the DHCP server for
	distribution to DHCP clients.
	If these addresses are not on the same subnet as
	the access point, the access point will perform
	Network Address Translation (NAT) for the clients
	to which it grants IP addresses.

73