Allied Telesis AT-WA7501, AT-WA7500 manual 127

AT-WA7500 and AT-WA7501 Installation and User’s Guide

Note

If any of the devices are also DHCP clients, you need to check the Allow DHCP check box.

To configure 802.11a radio inbound filters

1.From the main menu, click 802.11a Radio > Inbound Filters. The Inbound Filters screen appears.

2.For each frame type, check or clear each check box. For help, see the next table.

3.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

Table 40. 802.11a Radio Inbound Filter Descriptions

Parameter	Description
Allow IAPP	Determines if this radio accepts IAPP (Inter
	Access Point Protocol) frames from other access
	point station radios. The IAPP frames must match
	Ethernet protocol 875c.
Allow Wireless	Determines if this radio accepts WTP frames
Transport Protocol	from end devices. The WTP frames must match
(WTP)	Ethernet protocol 875b.
Allow UDP Plus	Determines if this radio accepts UDP Plus frames
(UDP/IP Port 5555)	from end devices. The UDP Plus frames must
	match the UDP network port 5555 on the DCS
	30X, Allied Telesyn Gateway, or ARP.

127