Allied Telesis AT-WA7500, AT-WA7501 manual Wtp, Svp

Chapter 4: Configuring the Radios

3.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

Table 35. 802.11b Radio Inbound Filter Descriptions

Parameter	Description
Allow IAPP	Determines if this radio accepts IAPP (Inter
	Access Point Protocol) frames from other access
	point station radios. The IAPP frames must match
	Ethernet protocol 875c.
Allow Wireless	Determines if this radio accepts WTP frames
Transport Protocol	from end devices. The WTP frames must match
(WTP)	Ethernet protocol 875b.
Allow SpectraLink	Determines if this radio accepts SVP frames from
Voice Protocol	voice wireless telephones. The SVP frames must
(SVP)	match IP 119.
Allow UDP Plus	Determines if this radio accepts UDP Plus frames
(UDP/IP Port 5555)	from end devices. The UDP Plus frames must
	match the UDP network port 5555 on the DCS
	30X, Allied Telesyn Gateway, or ARP.
Allow DHCP	Determines if this radio accepts DHCP frames.
	The DHCP frames must match UDP destination
	port 67 and ARP. Check this check box if the end
	devices are DHCP clients.
Allow All Other	Determines if this radio accepts all other
Protocols	protocols that are not filtered by one of the filters
	in this screen.

116