Allied Telesis AT-WA7500, AT-WA7501 manual 154

Chapter 5: Configuring the Spanning Tree

Subtype: Selects the frame subtype you wish to configure.

Value: The next table describes frame subtypes and their values. The value must be two hex pairs. When a match is found between frame subtype and value, the specified action is taken.

To customize subtype filters

1.From the main menu, click IP Tunnels > Customizable Subtype Filters. The Customizable Subtype Filters screen appears.

2.For each frame subtype field, check or clear the Allow/Pass check box to configure if the frame subtypes are passed or are dropped. If you check the check box, the frame subtype is allowed to pass.

3.In the SubType field, choose the customizable frame subtype. For help, see the next table.

4.In the Value field, enter the two hex pairs. For help, see the next table.

5.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

	Table 45. Subtype Filter Descriptions
Subtype		Value
DIX-IP-TCP-Port		Port value in hexadecimal.
DIX-IP-UDP-Port		Port value in hexadecimal.
DIX-IP-Protocol		Protocol number in hexadecimal.

154