Allied Telesis AT-WA7500, AT-WA7501 manual 242

Chapter 8: Managing, Troubleshooting, and Upgrading Access Points

Table 68. Alphabetized List of Configuration Error Messages (Continued)

Configuration Error Message	Additional Information
All SSID values must be unique per	While configuring multiple
physical radio.	service sets, you did not
	specify a unique SSID
	(network name) for each
	service set. For help, see
	“Configuring the 802.11g
	Radio” on page 98 or
	“Configuring the 802.11a
	Radio” on page 119.
An entry in the RADIUS server list is using	Allied Telesyn
a default secret key.	recommends that you
	change the secret key from
	the default for security
	reasons.
At least one 802.1x supplicant protocol
must be enabled.
Matching WEP keys will merge VLAN
multicast.
No RADIUS servers have been	Click the message and
configured for 802.1x authentication.	check the 802.1x check
	box for at least one server
	in the RADIUS Server List.
No RADIUS servers have been	Click the message and
configured for ACL authorization.	check the ACL check box
	for at least one server in
	the RADIUS Server List.
No RADIUS servers have been	Click the message and
configured for login authorization.	check the Login check box
	for at least one server in
	the RADIUS Server List.
The 802.1x username and password have
not been changed from their default
values.

242