Allied Telesis AT-WA7501, AT-WA7500 manual 191

AT-WA7500 and AT-WA7501 Installation and User’s Guide

3. Click Submit Changes to save your changes. This screen appears.

4.Configure the parameters for WEP configuration. To ensure maximum security, configure each WEP key with a different WEP code. For help, see the next table.

5.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

Table 52. WEP Security Parameter Descriptions

Parameter	Explanation
Security Level	Select Static WEP from the drop-down menu to
	use WEP 64/128/152 security.
WEP Transmit Key	Determines which of the four WEP keys this
	access point uses to transmit data.
WEP Key 1	For WEP 64, enter five ASCII characters or five
WEP Key 2	hex pairs. For WEP 128, enter 13 ASCII
WEP Key 3	characters or hex pairs. For WEP 152, enter 16
WEP Key 4	ASCII characters or hex pairs.
	To enter a hexadecimal key, prefix it with 0x. For
	example, the ASCII key ABCDE is equivalent to
	0x4142434445.

191