Allied Telesis manual AT-WA7500 and AT-WA7501 Installation and User’s Guide

AT-WA7500 and AT-WA7501 Installation and User’s Guide

2.From a command prompt, type: telnet IPaddress where IPaddress is the IP address of the access point.

3.Press Enter.

4.If necessary, enter the user name and press Enter. Then, enter the password and press Enter. The default user name is “atilan” and the default password is “atilan”. You can define a user name and password. For help, see “Setting Up Logins” on page 176. The Access Point Configuration menu appears.

Your telnet session is established.

45