Uniden TRU241 owner manual Installation, Charging the Battery Pack, Charging the Handset

I N S T A L L A T I O N

Charging the Battery Pack

The rechargeable nickel-cadmium battery pack must be fully charged before using your phone for the

first time. Before plugging the phone line into your new phone, you must charge the battery for

approximately 15 hours without interruption.

1. Remove the handset battery cover.

2. Plug the battery cable into the handset and place the battery pack inside the battery compartment.

3. Replace the battery cover.

▼ Charging the Handset

Place the handset on the base to charge. (The handset can charge in either the face-up or face-down position.)

▼Low Battery Indicator

When the battery pack in the handset is low and needs to be charged, the talk/battery low indicator flashes.

If this occurs while you are on the phone, you will hear an alert tone. Complete your call as quickly as possible and return the handset to the base for charging.

The plastic connectors will fit together only one way. Make sure the battery’s connector is properly aligned. Use only the Uniden battery pack (model BT-905).

INSTALLATION

I N S T A L L A T I O N [ 5 ]