Uniden TRU241 owner manual Direct Wall Plate Mounting

Direct Wall Plate Mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10-15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight

of the base and handset.	TOP
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring
devices suitable for the wall material where the base unit will
be placed.

1.Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2.Refer to steps 1 through 9 as in the “Mounting the Base Unit on a

Wall” section. (See page 7.)

3/16

in.

3-15/16

in.

[ 8 ] I N S T A L L A T I O N