Allied Telesis AT-WA7501, AT-WA7500 manual Troubleshooting With the LEDs

Troubleshooting With the LEDs

AT-WA7500 and AT-WA7501 Installation and User’s Guide

Table 68. Alphabetized List of Configuration Error Messages (Continued)

Configuration Error Message	Additional Information
You have enabled the embedded	You need to install a server
authentication server but you have not	certificate. For help, see
installed a server certificate to identify this	“Installing and Uninstalling
device.	Certificates” on page 208.
You have enabled TLS authentication but	You need to install a server
you have not installed a server certificate	certificate. For help, see
to identify this device.	“Installing and Uninstalling
	Certificates” on page 208.
You have enabled WPA pre-shared key	For help, see the Table 54,
for a radio port but the pre-shared key for	”WPA PSK Security
that port is empty.	Parameter Descriptions”
	on page 202.

When the access point boots, it performs internal diagnostics and the LEDs display the pattern shown in the next table.

Table 69. MobileLAN access LED Boot Sequence for Release 2.2 (or later)

Power Wireless #1 Wireless #2 Wired LAN Root/Error Description

Checksum Test starts

Checksum Test fails

Monitor Load

PCI Bus Test starts

PCI Bus Test fails

RAM Test starts

RAM Test fails

245