Allied Telesis AT-WA7500 manual Connecting the AT-WA7501 to Power

Connecting the AT-WA7501 to Power

AT-WA7500 and AT-WA7501 Installation and User’s Guide

option. For help, see “Connecting to Your Fiber Optic Network” on page 55.

To connect the AT-WA7501 to the Ethernet network

ˆAttach one end of the Ethernet cable to the 10BaseT/100BaseTx port on the AT-WA7501 and attach the other end to your Ethernet network or a power bridge (if you are using power over Ethernet), a Cisco power bridge or another 802.3af-compliant power bridge.

If your AT-WA7501 has the internal power supply option, you can use a power cord to connect the AT-WA7501 directly to an AC power outlet.

Caution

You must use the appropriate Allied Telesyn power supply with these devices or equipment damage may occur.

Attention: Vous devez utiliser la source d’alimentation Allied Telesyn adéquate avec cet appareil sinon vous risquez d’endommager l’équipement.

If you are using the power over Ethernet option, you must have the power bridge or another 802.3af-compliant power bridge. For help, see “Connecting Power Over Ethernet” on page 59 and the documentation that came with your power bridge.

To connect the AT-WA7501 to power

ˆPlug one end of the power cord into the power port on the AT-WA7501 and plug the other end into an AC power outlet. The access point boots as soon as you apply power.

53