AT-WA7500 and AT-WA7501 Installation and User’s Guide
3.(802.11g and 802.11b) Configure the station radio in the WAP to communicate with one of the master radio service sets in the access point:
a.From the main menu, click the link corresponding to the station radio. The radio screen appears.
b.In the Primary service set Node Type field, choose Station.
c.In the Primary service set SSID (Network Name) field, type the SSID. In this example, the SSID is Manufacturing.
d.Click Submit Changes to save your changes. The screen updates.
4.To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.
5.Configure the master radio in the WAP to communicate with the end devices. For help, see Chapter 4, “Configuring the Radios” on page 96.
6.Configure the master radio in the access point:
a.From the main menu, click the link corresponding to the master radio. The radio screen appears.
b.In the Frequency field, choose the radio frequency of your wireless network.
c.(802.11a only) Make sure the Allow Wireless Access Points field is On Primary.
d.In the Primary service set Node Type field, choose Master.
27
