Allied Telesis AT-WA7501, AT-WA7500 manual Using Test Mode Commands

Using Test Mode Commands

AT-WA7500 and AT-WA7501 Installation and User’s Guide

To display CAM commands

ˆType any letter or number other than B and press Enter. The CAM commands appear on the screen.

Within the AP monitor, Test mode lets you perform certain test functions.

Because the commands can cause undesirable results if not properly executed, you should contact Technical Support for assistance if you are unsure about the proper procedure to use.

To enter Test mode

1.Type TEST and press Enter.

2.Enter a password. The default password is EV98203T (case sensitive).

When you are in Test mode, the test prompt (test>) appears.

To exit Test mode

ˆAt the test prompt, type X and press Enter. You return the ap prompt.

269