Allied Telesis AT-WA7500, AT-WA7501 manual 168

Chapter 5: Configuring the Spanning Tree

Table 48. Global RF Parameter Descriptions (Continued)

Parameter	Explanation
S-UHF/902 MHz	Specifies the amount of time that a wireless end
Awake Time	device stays awake when radios are inactive. A
(S-UHF and 902	sleeping device is less responsive to radio
	activity; however, the longer a device is kept fully
MHz radios only)	awake, the larger the drain on the battery. You
	should set a device to stay awake long enough to
	receive an expected reply to a transmission and
	short enough to reduce power consumption. The
	awake time can be set to a number from 0 to 250
	tenths of a second.
RFC1042 Types to	If the RFC1042/DIX Conversion field is Enabled,
Pass Through	this parameter specifies values for protocol types
(802.11g, 802.11b,	that are to be passed without conversion. The list
	includes the Apple Talk protocol type, value
or 802.11a radios	80F3.
only)	Values entered in this parameter represent the
	protocol types of frames that will be passed
	without conversion to DIX format.

168