Allied Telesis AT-WA7501, AT-WA7500 manual Connecting Power Over Ethernet

AT-WA7500 and AT-WA7501 Installation and User’s Guide

Connecting Power Over Ethernet

The AT-WA7500 is powered by power over Ethernet. The AT-WA7501 can be powered by AC power or by power over Ethernet or both. For all access points, you need a power bridge. For a list of the power bridges that Allied Telesyn sells, contact your local Allied Telesyn representative.

This illustration shows how you connect the AT-WA7500 to a power bridge with a typical Ethernet cable to run power over Ethernet.

To AC

Power bridge

Power & Data Out	Data In
	Main

Power

Active

To Ethernet

Figure 19. Power Over Ethernet

To connect power over Ethernet

1.Install the power bridges. For help, see the documentation that shipped with the power bridge.

2.Use an Ethernet cable to connect the power bridge to the Ethernet port of the access point.

59