Chapter 2: Installing the Access Points
58
a patch cord with a female MT-RJ connector to insert into the access
point’s male MT-RJ fiber optic port, and an ST connector to insert into
the ST adapter.
an adapter for connecting the patch cord to the ST network.
To connect to an ST network
1. Remove any cable protectors attached to the patch cord and adapter.
2. Connect the access point to your network as shown in the next
illustration.
Note
The patch cord shown above must connect to the access point with
a female MT-RJ connector. For details, see “Using and Purchasing
the Required Patch Cord and Adapter” on page 55.
ST adapter
ST connector ST connector
To
ST networ
k
To
ST network
Female
MT-RJ connector
Patch cord
To access point