Allied Telesis AT-WA7500, AT-WA7501 manual Supported Dhcp Server Options

Chapter 3: Configuring the Ethernet Network

Table 16. DHCP Server Setup Parameter Descriptions (Continued)

Parameter	Explanation
Lease Time	Specifies the duration of the leases that are
	granted by the DHCP server. Enter the lease time
	in the format days:hours:minutes.
	If you set the lease time to 0, infinite leases are
	granted.
Permanently Save	If you check this check box, the DHCP server
IP Address	stores permanent mappings of IP addresses to
Mappings	DHCP client identifiers. A DHCP client is
	guaranteed to receive the same IP address each
	time it requests an address even if the DHCP
	server reboots.
	If you clear this check box, the DHCP server tries
	to grant clients the same address each time, but
	that result is not guaranteed.
Display-only parameters
IP Subnet Mask	Displays the subnet mask entered at the TCP/IP
	Settings screen.
IP Router	Displays the address of the IP Router.
(Gateway)
DNS Address 1	Displays the IP address of the Domain Name
	Server. This address will be used for name
	solution and will be distributed to DHCP clients
	when this access point is a DHCP server.
DNS Address 2	Displays the IP address of the Domain Name
	Server. This address will be used for name
	solution and will be distributed to DHCP clients
	when this access point is a DHCP server.
NAT Status	This informative entry lets you know if DHCP has
	been properly configured, and if the range of
	addresses has automatically enabled Network
	Address Translation (NAT).

Supported DHCP Server Options

When the access point is acting as a DHCP server, it issues IP address leases to configure the IP address, along with the DNS addresses, DNS suffixes, IP subnet mask, and IP router. These parameters will contain the same values as those configured for the access point.

74