Allied Telesis AT-WA7501, AT-WA7500 manual 185

AT-WA7500 and AT-WA7501 Installation and User’s Guide

To use an ACL

1.From the main menu, click Security and then click the radio service set you are configuring. The appropriate radio screen appears.

2.Check the Enable ACL Client Authorization check box if you want to use an ACL to authorize end devices to communicate with the network.

3.Click Submit Changes to save your changes.

4.Normally, the access point issues RADIUS requests with the user name and password of the end device that is trying to communicate with the network.

Check the Enable Alternative Method ACL check box if you want the access point to issue RADIUS requests with the user name and password both set to the MAC address of the end device that is trying to communicate with the network.

5.(External RADIUS server only) In the ACL RADIUS Client Password field, enter the password that is used to sign RADIUS access requests for all end devices attached to this access point. This password must match the password that is configured in the RADIUS server.

6.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

185