AT-WA7500 and AT-WA7501 Installation and User’s Guide
c.In the Secondary LAN Bridge Priority field, enter a number other than zero.
d.In the Secondary LAN Flooding field, choose Enabled.
6.Configure the spanning tree settings for the
a.From the main menu, click Spanning Tree Settings. The Spanning Tree Settings screen appears.
b.In the Root Priority field, enter a number other than 0.
c.In the Secondary LAN Bridge Priority field, enter 0.
d.In the Secondary LAN Flooding field, choose Disabled.
7.In the roaming end devices will be roaming across an IP router, you must configure IP tunnels. For help, see “Configuring IP Tunnels” on page 148.
8.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.
9.Configure the master radio in the
a.From the main menu, click the link corresponding to the master radio. The radio screen appears.
b. Make sure the Allow Wireless Access Points field is On Primary.
33
