Allied Telesis AT-WA7501, AT-WA7500 manual Restoring the Access Point to the Default Configuration

Restoring the Access Point to the Default Configuration

AT-WA7500 and AT-WA7501 Installation and User’s Guide

You may need to restore the access point to the factory default configuration. For a list of the default settings, see Appendix B, “Default Settings.” To restore the access point to the default configuration, you can use the Web browser interface, as explained in the following procedure:

1.In the menu bar, click Save/Discard Changes.

This screen appears.

2.Click Restore Factory Defaults. Under Pending Changes, you will see a list of what parameters need to be changed.

3.Click Save Changes and Reboot. When the access point is done rebooting, it will use the factory default settings as its active configuration. You may need to reset the IP address and other network parameters.

239