Allied Telesis manual AT-WA7500 and AT-WA7501 Installation and User’s Guide

AT-WA7500 and AT-WA7501 Installation and User’s Guide

To set frame type filters

1.From the main menu, click Ethernet > Frame Type Filters. The Frame Type Filters screen appears.

2.For each frame type field, check or clear the Allow/Pass check box to configure if the frame types are allowed to pass or are dropped. If you check the check box, the frame type is allowed to pass. For help, see the next table.

3.For each frame type field, set the Scope field to Unlisted or All. For help, see the next table.

4.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

81