Omron ZS-MDC user manual Installing on the DIN track, Installation procedure, Pfp-M

Section 2

Multi-Controller

■Installing on the DIN track

The following describes how to attach the 35 mm wide DIN track by quick, easy opera- tion.

DIN track (sold sepa- rately)

PFP-100N (1 m) PFP-50N (0.5 m) PFP-100N2 (1 m)

End plate (sold separately)

PFP-M

●Installation procedure

The following describes how to install the Multi-Controller and Sensor Controller on the DIN track.

Section 2 INSTALLATION & CONNECTION

1. Hook the connector end of the Sensor Controller onto the DIN track.

2. Push the Multi-Controller down onto the DIN track until the hook on the I/O cable side is locked.

Push down until you hear it snap into place.

Hook on connector

Hook on I/O cable

Always hook the connector end of the Multi-Controller on the DIN track first. Hooking the I/O cable end on the DIN track first may impair the mounting strength of the DIN track attachment.

ZS-MDC

User’s Manual

2-5