Omron ZS-MDC Following the same procedure as 2 to 3, set Up TASK2, Details to be output

Section 4 Measuring the Reference Difference between Steps

▲[SENSING]-[CALC]-[CALC]-[STEP]

3. Set the expression of TASK1.

INPUT X: INPUT A

INPUT Y: INPUT B

1 INPUT X 2 INPUT Y

Input A Input B Input C

Y X

4. Following the same procedure as 2 to 3, set

up TASK2.
INPUT X: INPUT A	X
INPUT Y: INPUT C

Input A Input B Input C

Y

Section 4

• To output the judgment result of the operation
▲[I/O SET]-[I/O SET]-[OUT]
5. Select TASK1 or TASK2 depending on the
	1	TASK1	2	TASK2
details to be output.
	3	TASK3	4	TASK4

To output judgment on the difference between point A (reference point) and point B: Set TASK1 to I/O SET

To output judgment on the difference between point A (reference point) and point

C:Set TASK2 to I/O SET

•To linear-output the operation result

▲[I/OSET]-[I/O SET]-[ANALOG]

5. Select TASK1 or TASK2 depending on the
	1	TASK1	2	TASK2
details to be output.
	3	TASK3	4	TASK4

To output the difference between point A (reference point) and point B: Set TASK1 to I/O SET

To output the difference between point A (reference point) and point C: Set TASK2 to I/O SET

The calculation results of each CH can be batch-acquired if you use the communication command.

APPLICATION SETTING EXAMPLES

ZS-MDC

User’s Manual

4-9