Example 3

Example 4

AT-WA7500 and AT-WA7501 Installation and User’s Guide

If you have a DHCP server on a Windows NT server and you want to use this DHCP server to assign TCP/IP parameters to end devices on a remote IP subnet, you need to set these filters to allow for the necessary IP tunneling.

1.On the root access point, set these filters:

ˆOn the IP Tunnels screen, check the Allow IP Multicast check box.

ˆIn the IP Tunnel Frame Type Filter table, configure DIX-IP-UDP Ports to pass all frames.

2.On the access point at the endpoint of the IP tunnel, set this filter:

ˆIn the IP Tunnel Frame Type Filter table, configure DIX-IP-UDP Ports to pass all frames.

If you have a Linux or Unix DHCP server and want to use this DHCP server to assign TCP/IP parameters to end devices on a remote subnet, you need to set this filter to allow for the necessary IP tunneling:

ˆIn the IP Tunnel Frame Type Filter table, configure DIX-IP-UDP Port to pass all frames.

159

Page 159
Image 159
Allied Telesis AT-WA7501, AT-WA7500 manual 159