Dell R610 owner manual VFlash Media, Installing the Internal USB Cable

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System."

3Remove the fan bracket. See "Removing the Fan Assembly."

4Remove the USB cable from the connector on the control panel.

5Remove the USB cable from the cable routing guides on the inside of the chassis. If necessary remove any other cables from the cable routing guides.

6Remove the USB cable from the connector on the system board.

Installing the Internal USB Cable

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System."

3Remove the fan bracket. See "Removing the Fan Assembly."

4Connect the USB cable to the connector on the control panel.

5Route the cable through the cable routing guides on the inside of the chassis.

6Connect the USB cable to the connector on the system board.

7Replace the fan bracket. See "Replacing the Fan Assembly."

8Close the system. See "Closing the System."

9Reconnect the system and peripherals to their power sources, and turn them on.

VFlash Media

The VFlash media card is a Secure Digital (SD) card that plugs into the optional iDRAC6 Enterprise card at the back corner of the system.

100

Installing System Components