Dell R610 owner manual RAID battery connector PERC only

cUnlatch the fan assembly and lift it far enough out of the chassis to route the SAS cable along the inside of the chassis, underneath the plastic retention clip. Replace the fan assembly and close the latches. See Figure 3-14, "Removing a Cooling Fan," and "Replacing a Cooling Fan."

dAttach the connector labeled "SAS A" to connector SAS A on the backplane, and attach the connector labeled "SAS B" to connector SAS B on the backplane. See Figure 3-17.

Figure 3-17. Installing the Integrated Storage Controller Card

1

8			2
			3
			4
	7
	6
	5
1	SAS data cable connector	2	integrated storage controller card
3	back card edge guide (black)	4	expansion card riser 1
5	front card edge guide (blue)	6	RAID battery connector (PERC only)
7	SAS data cable	8	cable retention clip

5Close the system. See "Closing the System."

Installing System Components

113