Dell R610 Integrated Devices Screen, Enables or disables the integrated storage controller

Integrated Devices Screen

Option	Description
Integrated SAS/RAID	Enables or disables the integrated storage controller.
Controller
(Enabled default)
User Accessible USB Ports	Enables or disables the user-accessible USB ports.
(All Ports On default)	Options are All Ports On, Only Back Ports On, and All
	Ports Off.
Internal USB Port	Enables or disables the internal USB port.
(On default)
Internal SD Card Port	Enables or disables the internal SD card port.
Embedded NIC1 and	Enables or disables the OS interface of the four
NIC2	embedded NICs. (The NICs may also be accessed
Embedded NIC3 and	through the system’s management controller.)
NIC4
Embedded Gb NICx	Enables or disables the embedded NICs. Options are
(NIC1 default: Enabled	Enabled, Enabled with PXE, Enabled with iSCSI Boot,
with PXE;	and Disabled. PXE support allows the system to boot
Other NICs: Enabled)	from the network.
MAC Address	Displays the MAC address for the NIC.
Capability Detected	Displays the features of the NIC hardware key, if
	installed.
	NOTE: Some NIC features may require the installation of an
	additional driver.
OS Watchdog Timer	Sets a timer to monitor the operating system for activity,
(Disabled default)	and aids in recovery if the system stops responding.
	When Enabled, the operating system is allowed to
	initialize the timer. When Disabled, the timer is not
	initialized.
	NOTE: This feature is usable only with operating systems
	that support WDAT implementations of the Advanced
	Configuration and Power Interface (ACPI) 3.0b
	specification.
I/OAT DMA Engine	When supported, this option enables or disables the I/O
(Disabled default)	Acceleration Technology feature.

64

Using the System Setup Program and UEFI Boot Manager