Dell R610 owner manual

To resolve the problem and remove the LCD message, refer to the corrective actions in the following table.

NOTE: The following LCD status messages are displayed in the Simple format. See “Setup Menu“to select the format in which the messages are displayed.

Table 1-1. LCD Status Messages

Code	Text	Cause	Corrective Actions
E1000	Failsafe	Check the system event log	Remove AC power to the
	voltage	for critical failure events.	system for 10 seconds or
	error.		clear the SEL.
	Contact		If the problem persists,
	support.
			see "Getting Help."
E1114	Ambient Temp	Ambient temperature has a	See "Troubleshooting
	exceeds	reached a point outside of	System Cooling
	allowed	the allowed range.	Problems."
	range.
E1116	Memory	Memory has exceeded	Remove AC power to the
	disabled,	allowable temperature and	system for 10 seconds and
	temp above	has been disabled to	restart the system.
	range. Power	prevent damage to the	See "Troubleshooting
	cycle AC.	components.
			System Cooling
			Problems."
			If the problem persists,
			see "Getting Help."
E1210	Motherboard	CMOS battery is missing or	See "Troubleshooting the
	battery	the voltage is outside of the	System Battery."
	failure.	allowable range.
	Check
	battery.

E1211 RAID	RAID battery is either
Controller	missing, bad, or unable to
battery	recharge due to thermal
failure.	issues.
Check
battery.

Reseat the RAID battery connector. See "Installing a RAID Battery" and "Troubleshooting System Cooling Problems."

24

About Your System