Dell R610 owner manual Closing the System, Lift up the latch on the cover

Figure 3-3. Removing and Replacing the System Cover

1

2

1 latch 2 latch release lock

Closing the System

1Lift up the latch on the cover.

2Place the cover onto the chassis and offset it slightly towards the back of the system, so that the two hooks on the back edge of the cover fit over the corresponding tabs on the back edge of the chassis. See Figure 3-3.

3Slide the cover towards the front of the chassis and close the latch.

4Rotate the latch release lock in a clockwise direction to secure the cover.

Installing System Components

81