Panasonic Complete Guide to Home Theater Speaker Assembly for SC-PT550 System

Speaker assembly

Preparation

•To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

•For assembly, use a Phillips-head screwdriver.

•There is no difference between the right and left speakers and stands.

•For optional wall mount (\ page 10).

Make sure you have all the indicated components before starting assembly, setup, and connection.

	∗1	2 Front speakers	∗1	2 Stands (with cable)	∗1	2 Bases	∗1	8 Screws
	∗2	2 Front speakers and	∗2	4 Stands	∗2	4 Bases	∗2	16 Screws
		2 Surround speakers		• 2 x stands with short cables:
				For front speakers
				• 2 x stands with long cables:
				For surround speakers
∗1	For Continental Europe, Australia and N.Z.
∗2	For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia and Kuwait

GETTING STARTED ENGLISH

1	2		4
			5Slide into the
			groove.
		1	3Tighten securely.

2

2 2

1Position the cable between the ridges.

Leave about 80 mm

4Insert the wire fully.

+: White −: Blue

Push!

5Press into the groove. 3Tighten securely.

1

Speaker assembly option

Thread the speaker cable through
the base.		Attach the
	Leave about 100 mm	speaker.

You can remove and use the cable from the stand. To reattach the cable (\ page 10).

7Preventing the speakers from falling

•You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.

•Consult a qualifi ed housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

2Insert the wire fully.

+: White −: Blue

Push!

3Press into the groove.

1Tighten securely.

String (not included) Thread from the wall to the speaker and tie tightly.

	Screw eye
Rear of the speaker	(not included) Wall

Approx. 150 mm

RQTX0038

9

RQT8043