Panasonic SC-PT850W manual Connect to the various television terminals, Television with Component

Connect to the various television terminals.

•Do not connect the unit through a video cassette recorder.

•Due to copy guard protection, the picture may not be displayed correctly.

•Turn the television off before connecting, and refer to the television’s operating instructions.

For Continental Europe	7 Television with COMPONENT
7 Television with SCART terminal	VIDEO IN terminals
Television	Video cables
	(not included)
(not included)
SCART cable
(not included)

GETTING STARTED ENGLISH

Using the SCART (AV) terminal

To improve picture quality, you can change the video signal output from the SCART (AV) terminal from “Video” to either “S-Video” or “RGB” to suit the type of television you are using. Select “S-Video/ YPbPr” or “RGB/No Output” from QUICK SETUP (\ page 14). Set “Video Mode” to “Off” (\ page 28, “HDMI” tab).

This connection will also enable you to play audio from your television through your home theater system. Refer to “Operating other equipment” (\ page 36).

7Television with an HDMI terminal

HDMI-compatible

television

(not included)

AV IN		AV OUT
	HDMI cable (not included)

Use the HDMI connection to enjoy higher quality audio and video with a single cable.

•Set “Video Mode” to “On” and “Audio Output” to “On” (\ page 28, “HDMI” tab).

•Set “Video Output Mode” (\ page 24, Picture Menu).

VIERA Link (“HDAVI Control”)

If your Panasonic television is a VIERA Link compatible television,

you can operate your television synchronising with home theater operations or vice versa (\ page 39).

Note

•Make the extra audio connection (\ page 36) when you use “HDAVI Control” function.

•It is recommended that you use Panasonic’s HDMI cable. [Recommended part number: RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.]

•Non-HDMI-compliant cables cannot be utilised.

For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia, Kuwait, Australia and N.Z.

7Television with a VIDEO IN terminal

Television

(not included)

Video cable

(included)

Television

(not included)

Using the COMPONENT VIDEO OUT terminals

These terminals can be used for either interlaced or progressive output. Connection using these terminals outputs the color difference signals (PB /PR) and luminance signal (Y) separately in order to achieve high fi delity in reproducing colors.

•The description of the component video input terminals depends on the television or monitor (example: Y/PB / PR, Y/B-Y/R-Y, Y/CB /CR).

•Connect to terminals of the same color.

For Continental Europe

•Panasonic televisions with 625 (576)/50i·50p, 525 (480)/60i·60p input terminals are progressive compatible. Consult the manufacturer if you have another brand of television.

RQTX0038

13

RQT8043