Panasonic SC-PT550 Glossary, CPPM Content Protection for Prerecorded Media, Decoder, DivX, I/P/B

Models: SC-PT850 SC-PT850W SC-PT550

1 48
Download 48 pages 236 b
Page 45
Image 45
 Glossary

CPPM (Content Protection for Prerecorded Media) Glossary

CPPM (Content Protection for Prerecorded Media)

A copy protection system used for DVD-Audio fi les. This unit supports CPPM.

Decoder

A decoder restores the coded audio signals on DVDs to normal. This is called decoding.

DivX

DivX is a popular media technology created by DivX, Inc. DivX media fi les contain highly compressed video with high visual quality that maintains a relatively small fi le size.

Dolby Digital

This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be multi-channel audio. A large amount of audio information can be recorded on one disc using this method.

DTS (Digital Theater Systems)

This surround system is used in many movie theaters around the world. There is good separation between the channels, so realistic sound effects are possible.

Dynamic range

Dynamic range is the difference between the lowest level of sound that can be heard above the noise of the equipment and the highest level of sound before distortion occurs.

Film and video

DVD-Videos are recorded using either fi lm or video. This unit can determine which type has been used, then uses the most suitable method of progressive output.

Film: Recorded at 25 frames per second (PAL discs) or 24 frames per second (NTSC discs). (NTSC discs recorded at 30 frames per second as well). Generally appropriate for motion picture fi lms.

Video: Recorded at 25 frames/50 fi elds per second (PAL discs) or 30 frames/60 fi elds per second (NTSC discs). Generally appropriate for TV drama programs or animation.

Frame still and field still

Frames are the still pictures that go together to make a moving picture.

There are about 30 frames shown each second.

One frame is made up of two fi elds. A regular television shows these fi elds one after the other to create frames.

A still is shown when you pause a moving picture. A frame still is made up of two alternating fi elds, so the picture may appear blurred, but overall quality is high.

A fi eld still is not blurred, but it has only half the information of a frame still so picture quality is lower.

HDMI (High-Definition Multimedia Interface)

HDMI is a next-generation digital interface for consumer electronic products. Unlike conventional connections, it transmits uncompressed digital video and audio signals on a single cable. This unit supports high-defi nition video output (720p,1080p) from the HDMI AV OUT terminal. To enjoy high-defi nition video, a high-defi nition compatible television is required.

I/P/B

MPEG 2, the video compression standard adopted for use with DVD-Video, codes frames using these 3 picture types. I: Intra coded picture

This picture has the best quality and is the best to use when adjusting the picture.

P: Predictive coded picture

This picture is calculated based on past I or P-pictures. B: Bidirectionally-predictive coded picture

This picture is calculated by comparing past and future I and P-pictures so it has the lowest volume of information.

JPEG (Joint Photographic Experts Group)

This is a system used for compressing/decoding color still pictures. If you select JPEG as the storage system on digital cameras, etc., the data will be compressed to 1/10–1/100 of its original size. The benefi t of JPEG is less deterioration in picture quality considering the degree of compression.

Linear PCM (Pulse Code Modulation)

These are uncompressed digital signals, similar to those found on CDs.

MP3 (MPEG Audio Layer 3)

An audio compression method that compresses audio to approximately one tenth of its size without any considerable loss of audio quality.

MPEG4

ENGLISH

 

A compression system for use on mobile devices or a

 

network, that allows highly effi cient recording at a low bit

 

rate.

 

Playback control (PBC)

 

If a Video CD has playback control, you can select scenes

 

and information with menus.

 

Progressive/Interlaced

 

The PAL video signal standard has 576 interlaced (i) scan

 

lines, whereas progressive scanning, called 576p, uses

 

twice the number of scan lines. For the NTSC standard,

ENGLISH

these are called 480i and 480p respectively.

 

Using progressive output, you can enjoy the high-resolution

 

video recorded on media such as DVD-Video. Your

 

television must be compatible to enjoy progressive video.

 

Sampling frequency

 

REFERENCE

Sampling frequency is the number of samples taken per

Sampling is the process of converting the heights of sound

 

wave (analog signal) samples taken at set periods into

 

digits (digital encoding).

 

second, so larger numbers mean more faithful reproduction

 

of the original sound.

 

WMA (Windows MediaTM Audio)

 

WMA is a compression format developed by Microsoft

 

Corporation. It achieves the same sound quality as MP3

 

with a fi le size that is smaller than that of MP3.

 

 

RQTX0038

 

 

 

45

 

 

RQT8043

Page 45
Image 45
Panasonic SC-PT550 Glossary, CPPM Content Protection for Prerecorded Media, Decoder, DivX, Dolby Digital, Dynamic range