Dell R610 owner manual cable connector on control panel

3Position the internal SD module tray so the tabs on the underside of the tray fit into the corresponding hooks on the chassis (item 3 in Figure 3-10), then lower the opposite edge of the card into place. See Figure 3-10.

Figure 3-10. Installing the Internal SD Module

1

2

8

7

			3
			4
			5
			6
1	internal SD module	2	latch
3	hooks (2)	4	cable connector on control panel
			board
5	internal USB connector	6	control panel board
7	cable connector on internal SD	8	internal SD flash card
	module

4Connect the internal SD module cable to the connector on the control panel board. See Figure 3-10.

5Close the system. See "Closing the System."

6Reconnect the system and peripherals to their power sources, and turn them on.

96

Installing System Components