SAFETY INFORMATION

Continued

Clothing or other flammable materials should not be hung from the heater, or placed on or near heater.

Installation and repair should be done by a qualified service person. The heater should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required as necessary. It is imperative that control compartments, burners, and circulating air passageways of the heater be kept clean.

CAUTION: The gas pressure regulator provided with this ap- pliance must be used. This regu- lator is set for an output pressure of 11" W.C. (0.4 P.S.I.).

1.Install and use heater with care. Follow all local ordinances and codes. In the ab- sence of local ordinances and codes, refer to the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58, CAN/-B149 Installation CODE. This instructs on the safe storage and handling of propane/LP gases.

2.Use only propane/LP gas set up for vapor withdrawal in a 20 lb. cylinder. Cylinder must be constructed and marked in accordance with specifications for propane/LP cylinders of the U.S. Department of Transportation (DOT). The cylinder must be provided with a shutoff valve terminating in a propane/LP supply cylinder valve outlet. The valve must have external threads and marked “Use with Type 1” and a safety relief device having a direct communication with the vapor space of the cylinder. The cylinder used must in- clude a collar to protect the cylinder valve.

3.Keep appliance area clear and free from combustible materials, gasoline, paint thinner, and other fammable vapors and liquids. Dust is combustible. Do not use heater in areas with high dust content.

4.Spillage of combustible liquids into the fame could cause a fire.

5.Do not place combustible table cloths on heater table. If table cloth is used, do not allow any part of cloth to hang over edge of table into heat outlet area.

6.Table becomes warm in operation.

7.Minimum heater clearances from perma- nent combustible construction:

Front, Back and sides 6" (15.2 cm), Top 36" (0.91 m) (see Figure 1).

8.Before each use, check heater for leaks.

Never use an open fame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

9.Keep propane/LP cylinder below 100° F (38° C).

10.Use only the hose and factory preset regulator provided with the heater. Do not adjust regulator as gas leaks may occur.

11.Locate hose properly, keeping it out of pathways where people may trip over it or in areas where the hose may be subjected to accidental damage. Keep hose away from burner on inside of heater.

12.Check hose before each use of heater. Disconnect hose with 9/16" wrench. Check for tears and abrasions in hose and on regulator. If highly worn or cut, replace with hose specified by manufacturer be- fore using heater.

13.Do not alter heater. Keep heater in its origi- nal state. Do not use heater if altered.

14.Locate heater on stable and level surface.

15.Do not operate heater while sleeping or leave heater unattended.

6"

36" (0.91 m)

6"

 

(15.2 cm)

 

 

(15.2 cm)

 

 

6"

(15.2 cm) 6"

(15.2 cm)

Figure 1 - Clearances from Combustibles

118992-01Fwww.desatech.com

Page 3
Image 3
Desa Td101, Td103, Td109, Td111 owner manual Safety Information, 15.2 cm

Td101, Td103, Td109, Td111 specifications

Desa Td101, Td103, Td109, and Td111 are a series of innovative and advanced technologies designed for a variety of applications, primarily focusing on efficiency, sustainability, and user-centric solutions.

Starting with the Td101, this model is recognized for its compact design and energy-efficient features. It employs advanced sensor technology to monitor real-time efficiency and performance, allowing users to adjust settings based on their specific needs. The Td101 is particularly suitable for home use, with its low noise operation and compatibility with smart home systems, making it a favorite among environmentally-conscious consumers.

Moving on to the Td103, this model takes the foundational design of the Td101 and enhances it with additional features geared towards heavier workloads. It incorporates robust materials and an upgraded processing unit, ensuring durability and reliability under various conditions. The Td103 mobile application provides users with remote control capabilities, allowing them to manage settings and receive updates directly on their smartphones. Its energy optimization strategies not only reduce electricity costs but also promote a reduced carbon footprint, aligning with global sustainability goals.

The Td109 represents the mid-range offering of the series, combining the strengths of its predecessors while introducing innovations in connectivity and automation. By integrating Internet of Things (IoT) technology, the Td109 can communicate with other smart devices seamlessly. This model also features predictive maintenance alerts, helping users preemptively address potential issues before they escalate. Its sleek design is accompanied by an intuitive user interface, making it accessible for users of all technical backgrounds.

Lastly, the Td111 is the flagship model, showcasing the pinnacle of development within the series. It features advanced AI algorithms that learn user habits, enabling personalized performance adjustments that enhance usability. This model is particularly adept in commercial environments, handling high-demand operations with ease. The Td111 also sets itself apart with its scalability; users can easily integrate additional units for expanded capacity as required. Additionally, its real-time analytics dashboard provides comprehensive insights into performance trends, helping businesses make data-driven decisions.

In summary, Desa Td101, Td103, Td109, and Td111 represent a progressive evolution in technology, focusing on enhancing user experience through smart features, energy efficiency, and sustainable practices. Each model caters to unique market needs while retaining a consistent commitment to innovation and reliability.