Onkyo TX-NR708 Picture Adjust, Game Mode, Wide Mode*1*2, Picture Mode*1*2, Film Mode*2

Note

•To name a radio preset, use TUNER to select AM or FM, and then select the preset (➔ 33).

•(North American models) You cannot enter a custom name for SIRIUS radio presets.

•“Name Edit” is not operable when the input selector is set to “NET/USB”.

To restore a custom name to the default, erase the custom name by entering an empty white space for each letter.

Picture Adjust

Using “Picture Adjust”, you can adjust the picture qual- ity and reduce any noise appearing on the screen.

To view the TV picture while setting, press ENTER. To return to the previous screen, press RETURN.

Note

•If you are using the analog RGB input, the following settings have no effect: “Film Mode”, “Edge Enhancement”, and “Noise Reduction”.

•“Picture Adjust” is not operable when the input selector is set to “NET/USB”.

■Game Mode

`Off:

Game Mode off.

`On:

Game Mode on.

If video signal delay occurs during playback on a video component (i.e. game console), select the corresponding input source and set the “Game Mode” setting to “On”. The delay will decrease but in return the picture quality will become poor.

■Wide Mode*1*2

This setting determines the aspect ratio.

Note

•When the “Game Mode” is set to “On”, this setting is fixed at “Full”.

`4:3:

`Full:

`Zoom:

En

`Wide Zoom:

`Auto:

According to the input signals and monitor output setting, the AV receiver automatically selects the “4:3”, “Full”, “Zoom” or “Wide Zoom” mode. For the monitor output setting (➔ 43).

■Picture Mode*1*2

`Through:

The following settings are set to the default values: “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue” and “Saturation”

`Custom:

You can set the following settings as you like: “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue” and “Saturation”

`Cinema:

Selected when the picture source is movie film, etc.

`Game:

Select to use in connecting a game console.

With “Picture Mode”, you can change the following set- tings to be suitable for the movie or game screen by one operation; “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue” or “Satu-

ration”.

Note

•When the “Picture Mode” setting is set to other than “Custom”, the following settings cannot be selected: “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Con- trast”, “Hue” and “Saturation”.

■Film Mode*2

`Video:

Does not process in either “3:2” or “2:2”.

`Auto:

Adjusts to the picture source, automatically selecting “Film Mode”.

`3:2:

Selected when the picture source is movie film, etc.

`2:2:

Selected when the picture source is computer graph- ics, animation, etc.

The AV receiver will adjust to the picture source, process- ing in either “3:2” or “2:2” (Film Mode). It automatically converts the source to the appropriate progressive signal and reproduces the natural quality of the original picture. When the “Film Mode” setting is set to “Auto”, the AV receiver automatically detects the picture source and in either “3:2” or “2:2”. However, there may be times when you will get a better picture by setting “Film Mode” your- self.

Note

•If the “Game Mode” setting is set to “On” (➔ 52), this setting is fixed at “Video”.

52