Onkyo TX-NR708 instruction manual About USB, USB Mass Storage Device Requirements

Page 67

■Gateway

If you set the “DHCP” setting to “Disable”, you must specify a gateway address.

Enter the gateway address provided by your ISP.

■DNS Server

If you set the “DHCP” setting to “Disable”, you must specify a DNS server.

Enter the DNS server addresses provided by your ISP.

■Proxy URL

To use a Web proxy, enter its URL here.

■Proxy Port

If you’re using a Web proxy, enter a proxy port number here.

■Control

This setting enables or disables control over the network.

`Enable:

Control over the network enabled.

`Disable:

Control over the network disabled.

Note

•When set to “Enable”, power consumption on standby mode slightly increases.

■Port Number

This is the network port used for control over the network.

Note

• Set the port number between from “49152” to “65535”.

About USB

USB can be used to play music files stored on USB mass storage devices (e.g., USB flash drives and MP3 players), which can be plugged into the AV receiver’s USB port.

Supported Audio File Formats

For USB mass storage device playback, the AV receiver supports music file formats.

See “Supported Audio File Formats” (➔ 63).

USB Mass Storage Device Requirements

•The AV receiver supports USB devices that support the USB mass storage device class.

•Playback may not be possible with some USB devices even if they conform to the USB mass storage device class.

•USB devices formatted with the FAT16 or FAT32 file system are supported.

•If the storage device has been partitioned, each section will be treated as an independent device.

•Each folder may contain up to 20000 music files and folders, and folders may be nested up to 16 levels deep.

•USB hubs and USB devices with hub functions are not supported.

Playing Music Files on a USB Device

This section explains how to play music files on a USB mass storage device.

DISPLAY

NET/USB

ENTER

q/w/e/r

RETURN

1, 3, 2, 5, 4, 7, 6

REPEAT

RANDOM

En

67

Page 66 Page 68
Image 67
Page 66 Page 68
Contents TX-NR708 Away from the rear panel or wall, creating a flue-like Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Board above the apparatus shall be set 10 cmPrecautions Aiming the Remote Controller Supplied AccessoriesUsing the Remote Controller Installing the BatteriesContents Processing Features40 FM/AM Presets excluding North American mod- els AmplifierAmplifier is prohibited THX Select2 PlusFront Panel Front & Rear PanelsCBL/SAT, GAME, PC, AUX, TUNER, TV/CD For detailed information, see the pages in parentheses DisplayPhono Rear PanelZone 2 Line OUT jacks Controlling the tuner Remote ControllerControlling the AV Receiver Standby buttonEnjoying Home Theater About Home TheaterSpeaker Connection Precautions Connecting the AV ReceiverConnecting Your Speakers Speaker ConfigurationScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm Connecting the Speaker CablesConnecting a Powered Subwoofer Using Dipole SpeakersBi-amping the Front Speakers Connecting a Power AmplifierHdmi cable About AV ConnectionsConnected image with AV components AV Cables and JacksJack Signal Components Assignable Connecting Your Components with HdmiAudio return channel ARC function Display when changing settings Connecting Your ComponentsFront Rear C Step Connecting Onkyo uComponentsHow to record the video Remote ControlAC Inlet Connecting AntennaConnect the supplied power cord to the AV receiver’s Plug the power cord into an AC wall outletWhich Connections Should I Use? Signal SelectionVideo Connection Formats Audio Connection Formats Depends on the Audio TV Out settingOnly the front L/R channels are output ON/STANDBY Turning On/Off the AV ReceiverTurning On Turning OffPlaying the Connected Component Selecting the Language Used for the Onscreen Setup MenusSetting the Display Brightness Basic OperationsUsing the Sleep Timer Muting the AV Receiver Using the Home MenuSelecting Speaker Layout Changing the Input Display Using HeadphonesChanging Source Component Using Easy MacrosRestoreing Default Turning Off the ComponentsSecond−Sixth measurement positions Audyssey MultEQ Room Correction Speaker SetupUsing Audyssey MultEQ First measurement positionEnter Changing the Speaker Settings Manually Error MessagesUsing a Powered Subwoofer Listening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioUsing RDS excluding North American and Taiwan models Presetting FM/AM StationsListening to Traffic News TP Finding Stations by Type PTYRDS program types PTY Recording Connecting a Recording ComponentAV Recording Listening Mode Buttons Using the Listening ModesSelecting Listening Modes Input Source SP Layout Listening ModeAbout Listening Modes Explanatory NotesDTS Listening ModesDSD *6 DTS-HD MasterAudio DTS ExpressTHX Listening Mode Description Input Speaker Source LayoutOnkyo-Original DSP Listening Modes Menu Advanced SetupOn-screen Setup Menus Common Procedures in Setup MenuBD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, Port Input/Output AssignMonitor Out Hdmi InputBD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX TV/CD, PHONO, Port Component Video InputDigital Audio Input Analog Audio InputSpeaker Settings Level Calibration Speaker DistanceTHX Audio Setup Equalizer SettingsBGC Multiplex/Mono Audio AdjustDolby LFE Level Source SetupTheater-Dimensional Audyssey DSXReference Level Dynamic VolumeSync IntelliVolumeName Edit Picture Mode*1*2 Picture AdjustGame Mode Wide Mode*1*2Listening Mode Preset Miscellaneous Hardware SetupVolume Setup OSD SetupTuner Sirius Settings North American modelsAudio Return Channel Power ControlTV Control Network Lock SetupAuto Power Down Firmware UpdateUsing the Audio Settings Re-EQ Setting the Incoming Digital Signal Fixed ModeAudio Selector About NET Connecting the AV ReceiverNetwork Requirements Playback starts and the following screen appears Listening to Internet RadioListening to vTuner Internet Radio Listening to Other Internet RadioItems on the Internet Radio Top Menu Registering Presets*1Station and Song Presets Playing Music Files on a ServerWMA Windows Media Player 11 SetupSupported Audio File Formats MP3AAC Server RequirementsAbout Dlna WAVSupported Music File Formats Windows Media Player 12 SetupUsing Remote Playback Remote Playback from Media Server/ Personal ComputerIP Address Network SettingsMac Address DhcpUSB Mass Storage Device Requirements About USBPlaying Music Files on a USB Device Input Plug your USB mass storage device into the AVReceiver’s USB port Press NET/USB repeatedly to select the USBZone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver Connecting Your Zone 2 Speakers to an Amp in ZoneControlling Zone 2 from the AV receiver Setting the Powered Zone Using ZoneUse Front WIDE/ZONE 2 L/R terminals to Standby Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone Muting ZoneUsing a Multiroom Kit with a Cabinet Using a Multiroom Kit with ZoneControlling iPod Connecting the iPod Directly to the USB PortStandard Mode control Extended Mode controlModels sold are different depending on the region Connecting an Onkyo DockOnkyo Dock Cable UP-A1 Dock Using the Onkyo DockWith the RI Control Controlling Your iPodRI Dock Without the RI ControlON, Standby TOP Menu Repeat Random Play Mode DISPLAY*7 Muting Album +Available buttons ND-S1Looking up for Remote Control Code Preprogrammed Remote Control CodesControlling Other Components Remote Control Codes for Onkyo Components Connected via u Entering Remote Control CodesControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller You can reset the remote controller to its default settingsGuide TOP Menu Enter Setup Search Repeat Random Play ModeVCR/PVR ON, Standby InputDeleting Learning Commands Learning CommandsUsing Normal Macros To learn more commands, repeat steps 2Deleting Macros Making MacrosRunning Macros There’s no sound, or it’s very quiet TroubleshootingStandby indicator flashes red Can’t turn on the AV receiverOnly the front speakers produce sound There’s no sound with a certain signal formatCan’t select the Pure Audio listening mode About DTS signalsThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workBeginning of audio received by an Hdmi in can’t be heard There’s no pictureStand-by power consumption Can’t learn commands from another remote controllerCan’t access the music files on a USB device Can’t access the server or Internet radioNent Video Monitor OUT How do I change the language of a multiplex sourceUfunctions don’t work CBL/SAT, GAME, or AUX inputVideo Section SpecificationsAmplifier Section Tuner Section GeneralOthers Audio OutputsSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with p connection Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsOutput Video Resolution ChartOutput Memo Onkyo China Limited Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

TX-NR708 specifications

The Onkyo TX-NR708 is a high-performance AV receiver that offers a superb blend of power, versatility, and advanced technology, making it a top choice for home theater enthusiasts. Designed to deliver an immersive audio and video experience, it supports a wide array of formats and features that cater to modern needs.

One of the standout features of the TX-NR708 is its 7.2 channel configuration, which allows for the creation of a powerful surround sound setup. With a rated output of 100 watts per channel, this receiver can drive even demanding speakers while ensuring clarity and detail across a wide range of frequencies. It also supports Dolby TrueHD and DTS-HD Master Audio, delivering lossless audio quality that can bring movies, music, and gaming to life.

In terms of video capabilities, the TX-NR708 is equipped with HDMI 1.4 inputs, which support 3D video and 4K upscaling. This ensures that users can enjoy their content at the highest quality available, making it a future-proof option as 4K content becomes more accessible. The receiver also includes advanced video processing technologies, such as Faroudja DCDi Cinema, enhancing video signals for better clarity and color accuracy.

The Onkyo TX-NR708 features Audyssey MultEQ room calibration technology, which measures the acoustic properties of the listening environment and automatically adjusts the receiver’s settings to provide optimal sound performance. This feature is particularly beneficial for those who may encounter acoustic challenges in their rooms, ensuring a consistent and balanced audio experience.

Connectivity is another area where the TX-NR708 excels. It includes multiple HDMI inputs, digital audio inputs, and analog connections, making it easy to integrate with various devices. Moreover, it supports various streaming services and internet radio through built-in networking features, allowing users to enjoy their favorite music directly from the receiver.

The Onkyo TX-NR708 also includes an intuitive on-screen display and a remote control that simplifies navigation and operation. With its combination of power, advanced technology, and versatile connectivity options, the Onkyo TX-NR708 stands out as an exceptional choice for anyone looking to enhance their home entertainment system. Whether for movies, gaming, or music, this receiver is designed to deliver a captivating and immersive experience.
Top Page Image Contents