LG Electronics 90VA MU-42PZ90B, 44VR MU-42PZ44S External A/V Source Setup, DVD Setup, DTV Setup

Installation

External A/V Source Setup

How to connect

1.Connect the provided BNC-RCA adapter to the monitor’s

VIDEO INPUT.

2.Connect the audio and video cables from the external equipment's output jacks to the monitor input jacks, as shown in the figure. When connecting the monitor to exter- nal equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

How to use

1.Use the INPUT SELECT button on the remote control to select Video.

2.Operate the corresponding external equipment. Refer to external equipment operating guide.

R AUDIO L	Y	PB	PR				R AUDIO L (MONO)
AUDIO INPUT	COMPONENT INPUT			REMOTE	S-VIDEO	VIDEO	AUDIO INPUT
				CONTROL		INPUT

R AUDIO L VIDEO

Camcorder

Video game set

DVD Setup

R AUDIO L	Y	PB	PR				R AUDIO L (MONO)
AUDIO INPUT	COMPONENT INPUT			REMOTE	S-VIDEO	VIDEO	AUDIO INPUT
				CONTROL		INPUT

How to connect

1.Connect the DVD video outputs to the COMPONENT (Y, PB, PR) INPUT jacks and connect the DVD audio outputs to the AUDIO INPUT jacks on the monitor, as shown in the figure.

2.If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the monitor and connect the DVD audio outputs to the AUDIO INPUT jacks, as shown in the figure.

(R) AUDIO (L) B R

DTV Setup

or

DVD

(R) AUDIO (L) S-VIDEO

How to use

1.Turn on the DVD player, insert a DVD.

2.Use the INPUT SELECT button on the remote control to select Component. (If connected to S-VIDEO, select the S-Videoexter- nal input source.)

3.Refer to the DVD player's manual for operating instructions.

•Component Input ports

To get better picture quality, connect a DVD player to the compo- nent input ports as shown below.

Component ports of the	Y	PB	PR
Monitor
Video output ports	Y	Pb	Pr
	Y	B-Y	R-Y
of DVD player	Y	Cb	Cr
	Y	PB	PR

-To watch digitally broadcast programs, purchase and connect a digital set-top box.

-This monitor supports HDCP (High-bandwidth Digital Contents Protection) protocol for DTV (480p,720p,1080i) modes.

				R AUDIO L	Y	PB	PR				R AUDIO L (MONO)
DVI INPUT	RGB INPUT	AUDIO INPUT	RGB OUTPUT	AUDIO INPUT	COMPONENT INPUT			REMOTE	S-VIDEO	VIDEO	AUDIO INPUT
								CONTROL		INPUT

How to connect

1.Use the monitor’s COMPONENT (Y, PB, PR) INPUT, RGB or DVI jack for video connections, depending on your set-top box connector. Then, make the corre- sponding audio connections.

How to use

1.Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

2.Use INPUT SELECT on the remote control to select Component, RGB or DVI.

DVI-DTV OUTPUT (R) AUDIO (L)

or	or
	RGB-DTV OUTPUT(R)AUDIO (L)

Digital Set-top Box

(R) AUDIO (L) B R

12 Plasma Display