Operation
Operation
Turning on the Monitor
Turning on the Monitor just after installation
1.Connect power cord correctly.
2.Press the 
ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT,
MULTIMEDIA button on the remote control to switch the Monitor on.
Turning on the Monitor (power cord is still connected)
1. If the Monitor was turned off with the 
ON/OFF button on the Monitor
•Press the 
ON/OFF button on the Monitor to turn the Monitor on.
2.If the Monitor was turned off with the remote control and the 
ON/OFF button on the Monitor
•Press the 
ON/OFF button on the Monitor and then press the INPUT SELECT button on the Monitor. Or, on the remote control, press POWER, INPUT SELECT, or MULTIMEDIA to turn the Monitor on.
Menu Language Selection
-The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use D / E button to select the SPECIAL menu. 2. Press the G button and then use D / E button to select Language.
3. Press the G button and then use D / E button to select your desired language. From this point on, the
4. Press the ENTER button to save.
SPECIALI
Language G
Key lock ISM Method Low power Set ID Caption / Text Captions OSD Rotate
MENU Prev.
English
Español
Français
Owner’s Manual 15