LG Electronics E2210PM, E1910PM owner manual Screen blinks, Have you installed the display driver?

Page 26

Troubleshooting

Display image is incorrect

●The screen color is mono or abnormal.

●The screen blinks.

•Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

•Make sure the video card is properly inserted in the slot.

•Set the color setting higher than 24 bits (true color) at Control Panel - Settings.

•Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA

DDC) monitor found" message?

●Have you installed the display driver?

•Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com.

•Make sure to check if the video card supports Plug&Play function.

25

Image 26

Contents LCD Monitor Do not Open the Display Important PrecautionsOn Safety To Avoid Personal InjuryOn Installation On Disposal On CleaningOn Repacking Accessories Thank for selecting LGE productsConnecting the Display Stop Pin Stand Body Stand BaseAfter installation, adjust the angle as shown below Positioning your displayErgonomic Using the Pivot function Landscape & Portrait You can rotate the panel 90o clockwiseConnecting with the PC Varies according to modelMenu Button OSD LOCKED/UNLOCKED Control Panel FunctionsFront Panel Controls Source Hot key Power IndicatorInput Button On Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment Setting menusMenu Name Icons Sub- menus Button TipUser RED PresetColor Temp GreenAuto PhaseHorizontal Vertical Clock E1910PM 1280 x E2210PM 1680 xWhite Language Power IndicatorReset Language Menus E1910PM E2210PM Icons Sub MenusMenu Name When F-ENGINE is not NORMAL,CONTRAST can not be selected MovieOn Screen DisplayOSD Selection and Adjustment Only E2210PM Normal The Photo Effect function is disabled Sepia OSD Unlocked will appear TroubleshootingIs the power indicator light on? Display image is incorrect Screen color is mono or abnormal Have you installed the display driver?Screen blinks Range Power Input SpecificationsDisplay Sync Input Video Input Resolution Plug&Play Stand Base Attached , Detached O Power cordPower Consumption E2210PMPreset Modes Resolution IndicatorInstalling the Wall mount plate Wall mount plateSeparate purchase Kensington Security SlotModel