LG Electronics E1910PM, E2210PM Wall mount plateSeparate purchase, Kensington Security Slot

Page 31

Installing the Wall mount plate

3. Install the Wall mount plate.

Wall mount plate(Separate purchase)

This is stand-type or wall mount type and is connectable with Wall mount plate.

Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.

Wall Mount pad

<Screw Mounting Interface Dimension> Hole spacing : 75 mm x 75 mm.

Kensington Security Slot

Connected to a locking cable that can be purchased separately at most computer stores.

NOTE

VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications

Please use VESA standard as below.

*784.8 mm and under (30.9 inch)

-Wall Mount Pad Thickness : 2.6 mm

-Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm

*787.4 mm and above (31.0 inch)

-Please use VESA standard wall mount pad and screws.

30

Image 31

Contents LCD Monitor To Avoid Personal Injury Important PrecautionsOn Safety Do not Open the DisplayOn Installation On Repacking On CleaningOn Disposal Thank for selecting LGE products AccessoriesStop Pin Stand Body Stand Base Connecting the DisplayPositioning your display After installation, adjust the angle as shown belowErgonomic Landscape & Portrait You can rotate the panel 90o clockwise Using the Pivot functionVaries according to model Connecting with the PCFront Panel Controls Control Panel FunctionsMenu Button OSD LOCKED/UNLOCKED Input Button Power IndicatorSource Hot key Screen Adjustment On Screen Display OSD Control AdjustmentSetting menus On Screen DisplayOSD Selection and AdjustmentButton Tip Menu Name Icons Sub- menusGreen PresetColor Temp User REDE1910PM 1280 x E2210PM 1680 x PhaseHorizontal Vertical Clock AutoReset Language Language Power IndicatorWhite Menu Name E1910PM E2210PM Icons Sub MenusMenus Movie When F-ENGINE is not NORMAL,CONTRAST can not be selectedOn Screen DisplayOSD Selection and Adjustment Only E2210PM Normal The Photo Effect function is disabled Sepia Is the power indicator light on? TroubleshootingOSD Unlocked will appear Display image is incorrect Screen blinks Have you installed the display driver?Screen color is mono or abnormal Stand Base Attached , Detached O Power cord SpecificationsDisplay Sync Input Video Input Resolution Plug&Play Range Power InputE2210PM Power ConsumptionIndicator Preset Modes ResolutionInstalling the Wall mount plate Kensington Security Slot Wall mount plateSeparate purchaseModel