LG Electronics 910B manual On Installation, On Cleaning, On Repacking

Page 3

Important Precautions

To Prevent Fire or Hazards:

Always turn the monitor OFF if you leave the room for more than a short period of time. Never leave the monitor ON when leaving the house.

Keep children from dropping or pushing objects into the monitor's cabinet openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this monitor.

During a lightning storm or when the monitor is to be left unattended for an extended period of time, unplug it from the wall outlet.

Do not bring magnetic devices such as magnets or motors near the picture tube.

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the monitor where the power cord is subject to damage.

Do not use this monitor near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

Monitors are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the monitor on a bed, sofa, rug, etc.

Place the monitor in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the monitor near or over a radiator or heat source.

Do not install the monitor in a dusty area. It can cause fire.

On Cleaning

Unplug the monitor before cleaning the face of the monitor screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the monitor screen because overspray may cause electrical shock.

On Repacking

Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

A2

Image 3
Contents 910B On Safety Important PrecautionsOn Installation On CleaningOn Repacking Connecting the Tilt/Swivel stand Connecting the MonitorPower Cord Using the ComputerControl Control Panel FunctionsFront Panel Controls Control FunctionScreen Adjustment On Screen Display OSD Control AdjustmentOn Screen DisplayOSD Selection and Adjustment To adjust the position of the screen To adjust the brightness and contrast of the screenTo adjust the shape of the screen To adjust the size of the screenTo customize the color of the screen PresetPress the Select or SET button To improve the clarity and stability of the screenTroubleshooting No image appearsScreen is flickering See waves on the screen Have you installed the monitor driver?Screen color is not normal See an after-image on the screenSpecifications Plug&Play Power Normal 83WConsumption 1024 x 68.677 Preset Modes Resolution640 x 43.269 800 x 53.674Digitally yours