LG Electronics 910B manual Using the Computer, Power Cord

Page 5

Connecting the Monitor

Using the Computer

1. Connect the signal cable. When mated, tighten the thumbscrews to secure the connection.

2. Connect the power cord into a properly power outlet that is easily accessible and close to the monitor.

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your monitor may differ from the view as shown.

Power Cord

Signal Cable

Attached Type*

Wall-outlet type*

PC-outlet type*

PC

MAC

Detached Type*

*Varies according to model.

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

A4

Image 5

Contents 910B On Safety Important PrecautionsOn Repacking On InstallationOn Cleaning Connecting the Tilt/Swivel stand Connecting the MonitorPower Cord Using the ComputerFront Panel Controls Control Panel FunctionsControl Function ControlScreen Adjustment On Screen Display OSD Control AdjustmentOn Screen DisplayOSD Selection and Adjustment To adjust the position of the screen To adjust the brightness and contrast of the screenTo adjust the shape of the screen To adjust the size of the screenTo customize the color of the screen PresetPress the Select or SET button To improve the clarity and stability of the screenScreen is flickering TroubleshootingNo image appears Screen color is not normal Have you installed the monitor driver?See an after-image on the screen See waves on the screenConsumption SpecificationsPlug&Play Power Normal 83W 640 x 43.269 Preset Modes Resolution800 x 53.674 1024 x 68.677Digitally yours