LG Electronics M227WA, M237WA owner manual RS-232C Configurations, Set ID, Communication Parameters

APPENDIX

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable)											3-Wire Configurations(Not standard)
	PC								SET			PC			SET
RXD	2		3							TXD	RXD	2		3		TXD
TXD	3								2	RXD	TXD	3			2	RXD
GND	5							5		GND	GND	5			5	GND
DTR	4						6			DSR	DTR	4	6			DTR
DSR	6					4				DTR	DSR	6	4			DSR
RTS	7				8					CTS	RTS	7	7			RTS
CTS	8			7						RTS	CTS	8	8			CTS
	D-Sub 9	D-Sub 9										D-Sub 9	D-Sub 9

Set ID

-Use this function to specify a set ID number.

-Refer to ‘Real Data Mapping 1’. See page 68.

1Press the MENU button and then use D / E button to select the Option menu.

2Press the G button and then use D / E button to select Set ID.

3Press the G button and then use F / G button to adjust Set ID to choose the desired Set ID number.

•The adjustment range of SET ID is 1~ 99.

Option

Language
PIP
Key Lock
Set ID	G	1
DDC-CI
Power Indicator
Factory Reset
DE F G OK	RETURN

Communication Parameters

A Baud rate : 9600 bps (UART)	A Stop bit : 1 bit
A Data length : 8 bits	A Communication code : ASCII code
A Parity : None	A Use a crossed (reverse) cable.

64